Name: BlueWello Antichlor De-Chlorination Solution
Brand: Bluewello
SKU: 6900
Availability: InStock

Description

Overview

BlueWello Antichlor is a high-performance, instant liquid de-chlorination solution specifically designed to safeguard Reverse Osmosis (RO) systems. Chlorine is a powerful oxidant that can permanently damage RO membranes; Antichlor neutralizes free chlorine on contact, extending your membrane life by years and reducing replacement costs.

Key Advantages

Instant Membrane Protection: Reacts immediately to eliminate free chlorine, preventing oxidative damage to expensive industrial and commercial RO membranes.
Superior Stability: Unlike competitors who use tap water, BlueWello uses 100% Demineralized (DM) Water. This prevents metal ions from degrading the SMBS, ensuring the product stays at full strength for longer.
No-Clog Formula: As a professionally filtered liquid solution, there is zero risk of undissolved powder particles clogging your chemical dosing valves or pump heads.
Enhanced System Safety: Effectively removes chlorine to prevent the formation of harmful disinfection byproducts like THMs, making water safer for industrial processes and environmental discharge.
Cost-Effective Maintenance: Acts as “preventative insurance” to avoid emergency downtime, high energy costs from fouled membranes, and frequent manual cleanings.

Technical Specifications

Feature	Specification
Active Ingredient	SMBS ( $Na_2S_2O_5$ )
Concentration	40% w/w
Appearance	Clear to Light Amber Liquid
pH (as is)	3.8 – 4.8
Specific Gravity	1.35 @ 25°C
Solubility	Completely Soluble in Water

Suggested Dosing Chart

Free Chlorine in Feed Water	Recommended Dosage (per 1000L)	Dilution Ratio (with RO Water)
0.5 ppm	1.5 – 2.0 ml	1:10
1.0 ppm	3.0 – 4.0 ml	1:10
2.0 ppm	6.0 – 8.0 ml	1:5
Above 2.0 ppm	Consult Technical Support	Use Neat (Undiluted)

Instructions for Use

Dosing Point: Inject Antichlor into the feed water line using a chemical metering pump. Ensure the injection point is after multi-grade filters but before the cartridge filter and high-pressure pump.
Dilution: If your pump requires dilution, always use DM Water or RO permeate. Prepare fresh batches every 3–5 days to maintain efficacy.
Monitoring: Regularly check “Free Chlorine” levels at the RO inlet using a DPD test kit or an ORP meter. An ORP reading below 200 mV indicates successful neutralization.

Safety & Storage

Storage: Keep container tightly closed in a cool, dry, well-ventilated area away from direct sunlight.
Compatibility: Do not mix directly with antiscalants or other acidic chemicals in the same dosing tank.
Handling: Product releases a pungent sulfur dioxide ( $SO_2$ ) odor when opened. Avoid breathing vapors. Wear gloves and goggles during handling.